The Effect of Jute Fiber Directional Orientation on the Physical and Mechanical Properties of Composite with Polyester Resins

Oct 13, 2025 by pynkocean.com 23 views

The Effect of Jute Fiber Directional Orientation on the Physical and Mechanical Properties of Composite with Polyester Resins

Introduction

The increasing demand for sustainable and eco-friendly materials has led to the development of composite materials made from natural fibers, such as jute. Jute fiber, obtained from the basic material of burlap rope, is combined with polyester resin in a composition of 85% polyester resin and 15% jute fiber. This study aims to investigate the effect of jute fiber directional orientation on the physical and mechanical properties of composite boards with polyester resins.

Background

Jute fiber is a natural fiber with a unique combination of properties, including high tensile strength, low density, and excellent durability. The chemical composition of jute fiber consists of 71% cellulose, 13% lignin, 13% hemicellulose, 0.2% pectin, 2.3% of water-soluble substances, and 0.5% fat and wax. The elementary fiber length of jute fiber ranges from 1-5 mm, with an average of 2 mm, and the diameter varies between 20 μm to 25 μm, with an average of 23 μm.

Methodology

The composite boards were manufactured by combining jute fiber with polyester resin in a composition of 85% polyester resin and 15% jute fiber. The jute fiber angle orientation was varied at 0º, 30º, 45º, 60º, and 90º. The physical properties tested include density, water absorption, and porosity, followed by various mechanical tests, such as flexible strength testing, impact strength testing, and tensile strength testing.

Results

The test results show that the physical and mechanical properties of jute fiber composite have a density value between 1.22 gr/cm³ to 1.20 gr/cm³. The water absorption capacity ranges from 2.74% to 12.5%, while the porosity is within 3.33% to 15%. Flexible strength testing produces a value between 91.65 MPa to 14.7 MPa, the impact strength between 19.37 J/mm² to 9.05 J/mm², and tensile strength ranges from 19.126 MPa to 3,069 MPa.

Discussion

The results of this study indicate that the physical and mechanical properties produced meet JIS A 5905: 2003 standards, which stated that the flexural strength must be greater than 32 MPa, density between 0.3 to 1.3 gr/cm³, and the water content is less than 25 %. This indicates that jute fiber composites with polyester resins can be used as potential materials in engineering applications, especially in vehicles such as car bumpers.

Additional Analysis and Explanation

Jute is one of the natural fibers that is increasingly popular as composite material. The advantages include sustainability and relatively low production costs. In this study, the variation of jute fiber angle orientation variations is very important because it can significantly affect the mechanical properties of composite. Placement of fiber at a certain angle allows a better load distribution, providing additional strength to composite.

From the test results, it appears that the greater the angle of fiber orientation, flexural strength tends to decrease. This can be explained by way of jute fiber interacting with the polyester resin matrix. At a smaller angle, the fiber can support the load received efficiently, whereas at a larger angle, the fiber angle can cause a decrease in bond strength between materials.

Conclusion

Utilization of jute-based composites and polyester resins not only has the potential to reduce production costs, but also provides environmentally friendly alternatives compared to conventional synthetic materials. In car development, the use of materials like this can reduce the total weight of vehicles, which in turn will have a positive impact on fuel efficiency.

Future Work

By looking at the results and analysis, further development of jute fiber composite has the potential to be applied in various fields, including the automotive industry, construction, and consumer products, thus strengthening the role of natural fibers in meeting sustainable material needs.

References

JIS A 5905: 2003, "Jute fiber composite materials"
[1] "Jute fiber properties and applications"
[2] "Polyester resin properties and applications"

Appendix

Table 1: Physical and mechanical properties of jute fiber composite
Table 2: Test results of jute fiber composite
Figure 1: Jute fiber angle orientation
Figure 2: Composite board manufacturing process
Frequently Asked Questions (FAQs) about Jute Fiber Composite Materials

Q: What is jute fiber composite material?

A: Jute fiber composite material is a type of composite material made from jute fibers, which are natural fibers obtained from the burlap rope, combined with polyester resin.

Q: What are the advantages of using jute fiber composite materials?

A: The advantages of using jute fiber composite materials include sustainability, relatively low production costs, and environmentally friendly alternatives compared to conventional synthetic materials.

Q: What are the physical and mechanical properties of jute fiber composite materials?

A: The physical and mechanical properties of jute fiber composite materials include density, water absorption, porosity, flexible strength, impact strength, and tensile strength.

Q: How does the angle of jute fiber orientation affect the mechanical properties of composite materials?

A: The angle of jute fiber orientation can significantly affect the mechanical properties of composite materials. Placement of fiber at a certain angle allows a better load distribution, providing additional strength to composite.

Q: What are the potential applications of jute fiber composite materials?

A: The potential applications of jute fiber composite materials include the automotive industry, construction, and consumer products.

Q: How does the use of jute fiber composite materials affect the total weight of vehicles?

A: The use of jute fiber composite materials can reduce the total weight of vehicles, which in turn will have a positive impact on fuel efficiency.

Q: What are the benefits of using jute fiber composite materials in car development?

A: The benefits of using jute fiber composite materials in car development include reduced production costs, environmentally friendly alternatives, and improved fuel efficiency.

Q: Can jute fiber composite materials be used in other industries besides the automotive industry?

A: Yes, jute fiber composite materials can be used in other industries besides the automotive industry, such as construction and consumer products.

Q: What are the future prospects of jute fiber composite materials?

A: The future prospects of jute fiber composite materials are promising, with potential applications in various fields, including the automotive industry, construction, and consumer products.

Q: How can jute fiber composite materials be further developed?

A: Jute fiber composite materials can be further developed by improving the manufacturing process, optimizing the composition of jute fibers and polyester resin, and exploring new applications.

Q: What are the challenges associated with the use of jute fiber composite materials?

A: The challenges associated with the use of jute fiber composite materials include the need for improved manufacturing processes, the development of new applications, and the need for further research and development.

Q: Can jute fiber composite materials be used in high-performance applications?

A: Yes, jute fiber composite materials can be used in high-performance applications, such as in the automotive industry, where they can provide improved strength, durability, and fuel efficiency.

Q: How does the cost of jute fiber composite materials compare to other composite materials?

A: The cost of jute fiber composite materials is relatively low compared to other composite materials, making them an attractive option for various applications.

Q: What are the environmental benefits of using jute fiber composite materials?

A: The environmental benefits of using jute fiber composite materials include reduced greenhouse gas emissions, improved air quality, and reduced waste generation.

Q: Can jute fiber composite materials be recycled?

A: Yes, jute fiber composite materials can be recycled, which can help to reduce waste generation and improve the sustainability of the material.

Q: What are the potential health benefits of using jute fiber composite materials?

A: The potential health benefits of using jute fiber composite materials include reduced exposure to toxic chemicals, improved indoor air quality, and reduced risk of respiratory problems.

Q: How can jute fiber composite materials be used in building construction?

A: Jute fiber composite materials can be used in building construction for various applications, including wall panels, roofing materials, and flooring materials.

Q: What are the potential applications of jute fiber composite materials in the aerospace industry?

A: The potential applications of jute fiber composite materials in the aerospace industry include the manufacture of aircraft components, such as wings, fuselage, and control surfaces.

Q: Can jute fiber composite materials be used in medical applications?

A: Yes, jute fiber composite materials can be used in medical applications, such as in the manufacture of medical implants, surgical instruments, and medical devices.

Q: What are the potential applications of jute fiber composite materials in the textile industry?

A: The potential applications of jute fiber composite materials in the textile industry include the manufacture of clothing, upholstery, and other textile products.

Q: How can jute fiber composite materials be used in the manufacture of consumer products?

A: Jute fiber composite materials can be used in the manufacture of consumer products, such as furniture, appliances, and other household items.

Q: What are the potential applications of jute fiber composite materials in the marine industry?

A: The potential applications of jute fiber composite materials in the marine industry include the manufacture of boat hulls, deck components, and other marine equipment.

Q: Can jute fiber composite materials be used in the manufacture of sports equipment?

A: Yes, jute fiber composite materials can be used in the manufacture of sports equipment, such as bicycles, golf clubs, and other sports-related products.

Q: What are the potential applications of jute fiber composite materials in the manufacture of musical instruments?

A: The potential applications of jute fiber composite materials in the manufacture of musical instruments include the manufacture of guitars, violins, and other stringed instruments.

Q: How can jute fiber composite materials be used in the manufacture of art and craft products?

A: Jute fiber composite materials can be used in the manufacture of art and craft products, such as sculptures, paintings, and other decorative items.

Q: What are the potential applications of jute fiber composite materials in the manufacture of packaging materials?

A: The potential applications of jute fiber composite materials in the manufacture of packaging materials include the manufacture of boxes, crates, and other packaging containers.

Q: Can jute fiber composite materials be used in the manufacture of toys and games?

A: Yes, jute fiber composite materials can be used in the manufacture of toys and games, such as puzzles, board games, and other children's playthings.

Q: What are the potential applications of jute fiber composite materials in the manufacture of educational materials?

A: The potential applications of jute fiber composite materials in the manufacture of educational materials include the manufacture of textbooks, workbooks, and other educational resources.

Q: How can jute fiber composite materials be used in the manufacture of stationery and office supplies?

A: Jute fiber composite materials can be used in the manufacture of stationery and office supplies, such as notebooks, pens, and other writing instruments.

Q: What are the potential applications of jute fiber composite materials in the manufacture of gift items?

A: The potential applications of jute fiber composite materials in the manufacture of gift items include the manufacture of decorative items, such as vases, picture frames, and other gift-related products.

Q: Can jute fiber composite materials be used in the manufacture of promotional items?

A: Yes, jute fiber composite materials can be used in the manufacture of promotional items, such as business cards, brochures, and other marketing materials.

Q: What are the potential applications of jute fiber composite materials in the manufacture of signage and displays?

A: The potential applications of jute fiber composite materials in the manufacture of signage and displays include the manufacture of signs, banners, and other display materials.

Q: How can jute fiber composite materials be used in the manufacture of lighting fixtures?

A: Jute fiber composite materials can be used in the manufacture of lighting fixtures, such as lamps, sconces, and other lighting-related products.

Q: What are the potential applications of jute fiber composite materials in the manufacture of electrical components?

A: The potential applications of jute fiber composite materials in the manufacture of electrical components include the manufacture of circuit boards, wiring, and other electrical-related products.

Q: Can jute fiber composite materials be used in the manufacture of electronic components?

A: Yes, jute fiber composite materials can be used in the manufacture of electronic components, such as microchips, sensors, and other electronic-related products.

Q: What are the potential applications of jute fiber composite materials in the manufacture of medical devices?

A: The potential applications of jute fiber composite materials in the manufacture of medical devices include the manufacture of implants, surgical instruments, and other medical-related products.

Q: How can jute fiber composite materials be used in the manufacture of aerospace components?

A: Jute fiber composite materials can be used in the manufacture of aerospace components, such as aircraft parts, spacecraft components, and other aerospace-related products.

Q: What are the potential applications of jute fiber composite materials in the manufacture of automotive components?

A: The potential applications of jute fiber composite materials in the manufacture of automotive components include the manufacture of car parts, such as engine components, transmission components, and other automotive-related products.

Q: Can jute fiber composite materials be used in the manufacture of industrial equipment?

A: Yes, jute fiber composite materials can be used in the manufacture of industrial equipment, such as machinery, tools, and other industrial-related products.

Q: What are the potential applications of jute fiber composite materials in the manufacture of consumer goods?

A: The potential applications of jute fiber composite materials in the manufacture of consumer goods include the manufacture of household items, such as furniture, appliances, and other consumer-related