The Growing Problem of Plastic Waste Management

Oct 13, 2025 by pynkocean.com 22 views

The Growing Problem of Plastic Waste Management

Plastic waste management is one of the most pressing issues faced by the world today. The increasing production and consumption of plastic have led to a significant amount of plastic waste, which is difficult to decompose naturally. This has resulted in serious environmental and health problems, including pollution, climate change, and harm to wildlife. One of the effective methods of plastic waste treatment is pyrolysis, a process that uses chemical recycling methods to reduce the volume of plastic waste. Pyrolysis involves the thermal decomposition of plastic waste in the absence of oxygen, resulting in the production of oil, gas, and solid residues.

The Purpose of This Study

The purpose of this study is to evaluate the quantity and quality of oil from pyrolysis from polypropylene (PP) and low-density polyethylene (LDPE) plastic types. The study aims to compare the oil produced from pyrolysis with oil in the market, with a focus on its quality and quantity. The results of this study can provide valuable guidelines for the development of plastic recycling technology and contribute to efforts to reduce plastic waste that is increasingly urgent in the community.

Methodology

In this study, each of the 15 kg of polypropylene (PP) and low-density polyethylene (LDPE) plastic types was used. The pyrolysis process was carried out in a temperature range of 250-350 °C. The results of the study showed that the quantity of oil produced from PP plastic reached 12,730 ml, while from LDPE plastic only 10,490 ml. Thus, PP plastic produces 21.3% more oil than LDPE plastic in the same treatment and temperature.

Oil Quality Analysis

The quality of pyrolysis oil can be measured through several parameters, including density, viscosity, and heat values. The highest density for oil from PP plastic pyrolysis is recorded at 250 °C, which is 811 kg/m³. Conversely, the lowest density is obtained at 350 °C, which is 782 kg/m³. This indicates that the density of oil from PP plastic pyrolysis is relatively high, which can be beneficial for its use as a fuel.

Viscosity is also an important parameter that affects oil performance. For PP plastic, the highest viscosity value is found at 250 °C with a value of 2.02 CP, while the lowest viscosity is at 350 °C, which is 0.86 CP. On the other hand, for LDPE plastic, the highest viscosity occurs at 350 °C of 1.35 cp, and the lowest at 250 °C with a value of 1.14 cp. This indicates that the viscosity of oil from PP plastic pyrolysis is relatively high, which can be beneficial for its use as a fuel.

Furthermore, the heat value of oil from pyrolysis is also measured. The highest heat value for PP plastic pyrolysis oil is recorded at 350 °C, reaching 10,870 kcal/g, while the lowest heat value is obtained at 250 °C, which is 10,386 kcal/g. This shows that with the increase in temperature, there is a potential increase in the energy quality of the oil produced.

Conclusion

Overall, the results of this study indicate that pyrolysis is an effective method for processing plastic waste into quality oil. PP plastic is proven to be more productive in producing oil than LDPE, with oil quality which also shows good performance in terms of density, viscosity, and heat value. This study provides valuable guidelines for the development of plastic recycling technology and can contribute to efforts to reduce plastic waste that is increasingly urgent in the community. With a better understanding of the process of pyrolysis and the results, it is hoped that more innovative solutions can emerge to deal with plastic waste that is a global challenge today.

Recommendations

Based on the results of this study, the following recommendations can be made:

Pyrolysis can be an effective method for processing plastic waste into quality oil.
PP plastic is more productive in producing oil than LDPE.
The quality of oil from pyrolysis is good in terms of density, viscosity, and heat value.
Further research is needed to improve the efficiency and effectiveness of pyrolysis.
The development of plastic recycling technology is essential to reduce plastic waste.

Future Research Directions

Future research directions can include:

Investigating the effects of different temperatures and pressures on the pyrolysis process.
Studying the properties of oil from pyrolysis and its potential applications.
Developing new technologies for plastic recycling and waste management.
Investigating the economic and environmental benefits of pyrolysis.

Limitations of the Study

The limitations of this study include:

The study was conducted on a small scale, and further research is needed to confirm the results.
The study only investigated the pyrolysis of PP and LDPE plastic types, and further research is needed to investigate other types of plastics.
The study did not investigate the economic and environmental benefits of pyrolysis.

Conclusion

In conclusion, this study provides valuable guidelines for the development of plastic recycling technology and contributes to efforts to reduce plastic waste that is increasingly urgent in the community. With a better understanding of the process of pyrolysis and the results, it is hoped that more innovative solutions can emerge to deal with plastic waste that is a global challenge today.

Q: What is pyrolysis?

A: Pyrolysis is a process that uses chemical recycling methods to reduce the volume of plastic waste. It involves the thermal decomposition of plastic waste in the absence of oxygen, resulting in the production of oil, gas, and solid residues.

Q: What are the benefits of pyrolysis?

A: The benefits of pyrolysis include:

Reducing the volume of plastic waste
Producing oil, gas, and solid residues that can be used as fuels or raw materials
Reducing greenhouse gas emissions
Creating jobs and stimulating economic growth

Q: What are the limitations of pyrolysis?

A: The limitations of pyrolysis include:

High energy requirements
High capital costs
Limited scalability
Potential environmental and health risks

Q: What are the differences between PP and LDPE plastic types?

A: PP (polypropylene) and LDPE (low-density polyethylene) are two types of plastics that have different properties and uses. PP is a thermoplastic that is commonly used in packaging, textiles, and automotive applications, while LDPE is a thermoplastic that is commonly used in packaging, films, and containers.

Q: What are the advantages of using PP plastic in pyrolysis?

A: The advantages of using PP plastic in pyrolysis include:

Higher oil yield
Higher oil quality
Lower capital costs
Easier scalability

Q: What are the advantages of using LDPE plastic in pyrolysis?

A: The advantages of using LDPE plastic in pyrolysis include:

Lower capital costs
Easier scalability
Potential for higher gas yield
Potential for higher solid residue yield

Q: What are the potential applications of pyrolysis oil?

A: The potential applications of pyrolysis oil include:

Fuel production
Chemical production
Power generation
Transportation fuels

Q: What are the potential environmental benefits of pyrolysis?

A: The potential environmental benefits of pyrolysis include:

Reducing greenhouse gas emissions
Reducing plastic waste
Reducing the need for fossil fuels
Creating jobs and stimulating economic growth

Q: What are the potential health benefits of pyrolysis?

A: The potential health benefits of pyrolysis include:

Reducing the risk of cancer and other diseases associated with plastic waste
Reducing the risk of respiratory and other health problems associated with air pollution
Creating jobs and stimulating economic growth

Q: What are the potential economic benefits of pyrolysis?

A: The potential economic benefits of pyrolysis include:

Creating jobs and stimulating economic growth
Reducing the cost of plastic waste disposal
Increasing the value of plastic waste
Creating new revenue streams

Q: What are the potential challenges and limitations of pyrolysis?

A: The potential challenges and limitations of pyrolysis include:

High energy requirements
High capital costs
Limited scalability
Potential environmental and health risks

Q: What are the potential future directions for pyrolysis research and development?

A: The potential future directions for pyrolysis research and development include:

Investigating the effects of different temperatures and pressures on the pyrolysis process
Studying the properties of oil from pyrolysis and its potential applications
Developing new technologies for plastic recycling and waste management
Investigating the economic and environmental benefits of pyrolysis.